GFI System CLOCKWORK V3, Руководство пользователя

Страница: 3 / 10

CHAPTER 2 ‐ Operation
From this point onward :

[Engage] will refer to the Engage footswitch,

[Tap ‐ Tempo] will refer to the Tap ‐ Tempo switch, and

[Mode/Edit] will refer to the Mode/Edit push button
Patch 1 Patch 2 Patch 3 Patch 4 Patch 1 Patch 2 Patch 3 Patch 4
BANK 1 BANK 2
Preset System
The 8 preset locations are organized in 2 banks, where each bank contains 4 patches.
5
LOAD PRESET
1. Hold [Tap Tempo] until the Tempo indicator LED (Bank LED) stops flashing.
2. Tap [Tap Tempo] as many times as needed to reach the desired preset location.
3. Tap [Engage] once to load the selected preset.
Presets are selected by going through each location in the ‘Up’ direction (1, 2, 3, …), while going
through these steps the sound does not get updated until selection is confirmed by pressing
[Engage].
Spillover: Reverb tail will be preserved when changing preset if and only if both source and
destination preset contains the same algorithm.
LOAD A PRESET IN A DIFFERENT BANK
1. Hold [Tap Tempo] until the Tempo indicator LED (Bank LED) stops flashing.
2. Press [Engage] and [Tap Tempo] together once <— this toggles the bank .
3. Tap [Tap Tempo] as many times as needed to reach the desired preset location.
4. Tap [Engage] once to load the selected preset.
6