background image

 

14 

 

Pos: null /BA_Module/BA_UA  Nothandbetätigung/BAUA000001_M003 @ 24\mod_1511866921360_28.docx @ 1061558 @ 1 @ 1 

 

8

 

Emergency manual operation (emergency hand crank) 

The emergency manual operation is designed for opening or closing the door without power 
supply. Its activation interrupts the control voltage. Electrical operation is no longer possible. 

 

 

Warning – Injuries due to incorrect operation or falling objects! 

 

 

Switch off voltage. 

 

Adopt a secure position. 

 

For drive units with brake, the emergency manual operation must be carried out 
against the closed brake. 

 

 

Warning - Danger of the door dropping! 

 

If you need to apply more than the permissible force of 390N (according to DIN EN 
12604/DIN EN 12453) to move the door by emergency manual operation, this 
indicates a stalling on the drive unit or door. Releasing the stalling may cause the 
door to drop.  

 

Adopt a secure position 

 

For drive units with brake, the emergency manual operation must be carried out 
against the closed brake. 

 

 

Caution – Damage to components! 

 

 

Do not move the door beyond the final limit positions. 

 

 

 

Содержание 10003900 10011





















Отзывы: