Download the GF PRO app from the App Store or Play Store.
Enable Bluetooth® on your device (smartphone, tablet, etc.)
1. DOWNLOAD THE APP
2. REGISTER PROGRAMMER
Connect the Programmer to the tap and to the
irrigation system.
IMPORTANT: wait before fitting the batteries.
Launch the GFPRO app and wait for it to load (fig. 1).
Now fit the batteries in accordance with the
instructions in figs. 2 and 3. Use exclusively a single
9V alkaline battery. Check that the LED is flashing
(fig. 4) then perform the scanning procedure (to
register the programmer) by clicking the icon at the
top right of the screen
The registration confirmation page will appear.
Assign Name and Password to the programmer
identified by the scanning procedure (fig. 5). The
password, which is mandatory, can be chosen freely
(minimum of 6 letters and/or numbers).
Once the programmer has been registered, the
overview page will show the programmer with the
Bluetooth® icon, which identifies connected
programmers ready for programming; now click on
the programmer you wish to set up (fig. 6).
Click the icon at the top left of the screen for
contacts, to change language, and to visit the G.F.
website (www.gfgarden.it)
YOU CAN REGISTER MULTIPLE GFPRO
PROGRAMMERS. If the Bluetooth® icon does not
appear next to the registered programmer, repeat
the scanning procedure by clicking on the icon
1
5
6
4
LED
GFPRO
2
3
3. CONTROL PANEL
Programmer name
Button to delete and/or rename programmer,
display information, app version and previously
set Password
Programmer internal
temperature
Battery level
Programs designed to provide irrigation at the optimal times of day and
differentiated in accordance with irrigation type: Above-ground
Irrigation or Drip Irrigation
Free manual programming. To set personalized programs
with up to 4 starts per day
Go back to start page
Very hot weather / rainy weather function. Based on the
next 5 days, you can increase or decrease the duration of
previously set programs manually in accordance with the
weather forecast (warmer or wetter).
Smart ECO. Automatically adapts the duration of previously set
programs based on the season, thus avoiding wastage to allow more
eco-friendly irrigation
Button to force water flow on / off condition. Click the icon to turn flow
on (light blue icon), and click again to turn flow off (grey icon). If the
flow is turned on, if it is not subsequently turned off manually it will be
turned off automatically after one hour
EN
5
https://www.kipogeorgiki.gr/
https://www.kipogeorgiki.gr/
