Rod locking
5
Assembly of Slimdrive SL and Slimdrive SLT product families (without RC2 variants)
Dimension “X”:
à
Slimdrive SL product family:
X = 53 mm (shown)
à
Slimdrive SLT product family:
X = 105.5 mm
4.2 Mounting the locking device
The position of the dead bolt (1) can be changed by turning the manual unlocking (4) with an Allen key (6 mm)
(see Emergency operation, Chapter 11).
X
Loosen the housing fasteners (5) and (6) of the locking device.
X
Slide the housing fasteners (5) and (6) on the right and left into
the rebate of the track.
X
Slide the locking device from the front into the rebate of the track
and screw onto the housing fasteners (7 Nm ± 0.5 Nm).
