GEZE Powerturn, Инструкция по установке и обслуживанию

Страница: 31 / 56

Powerturn
31
Installation
7.9 Installing the standard roller guide rail
Heed the separate installation instructions for sensor roller guide rail.
X
Push the suspension bolts completely into
the rail.
X
Push the optional opening restrictor into
the rail (refer to chapter 7.10).
X
Insert the end caps left and right into
the standard roller guide rail.
X
Screw the standard roller guide rail on with
2 screws. Tightening torque 6 +1 Nm (2×).
7.10 Installing the integrated opening restrictor
When a suspension bolt extension is used, an external door stopper must be set instead of the integrated open-
ing restrictor.
The installation process for the integrated opening restrictor (1) is described in the installation instructions for
the opening restriction, mat. no. 156338.
1