Powerdrive product family
10
Pre-mounting
5.5 Installing the drive components
The exact positioning of the components is given on the drive drawings.
Illustrated: 2-leaf, ÖW 900 mm
Illustrated: right hand slide to open, ÖW = 700 mm
Illustrated: left hand slide to open, ÖW = 700 mm
Legend:
ÖW
Opening width
U1
Position of the deflection pulley (measured from
the middle)
U2
Position of the motor gear unit
UR
Position of the deflection pulley (measured from
the side)
Vrs
Extension left
Vls
Extension right
When the drive is extended (Vls / Vrs) the positions of the components must be adapted accordingly.
X
Push the sliding blocks into the track from the right. For the arrangement, see the drive diagram.
X
Install the components with the screws provided in accordance with the drawing.
à
Deflection pulley torque: 15 Nm
à
Torque for other components: 10 Nm
