GEZE Lock M, Руководство по установке, Страница: 4 / 16

Hook bolt lock, Lock M
4
Safety notices
1.3 Safety conscious working
à
Secure workplace against unauthorised entry.
à
Watch swivelling range of long system parts.
à Never carry out work with a high safety risk (e.g. installing the drive, cover or door leaf) while alone.
à Secure the cover/drive panels against falling.
à Only use the cables prescribed in the cable plan provided. Lay shields in compliance with the wiring diagram.
à
Secure loose, internal drive cables with cable ties.
à
Before working on the electrical system:
à
Disconnect the drive from the 230 V mains and check to ensure that it is not supplied with power.
à
Disconnect the control unit from the 24 V rechargeable battery.
à
When an Uninterruptible Power Supply (UPS) is used, the system will still be under voltage even when
disconnected from the mains.
à
Always use insulated wire-end ferrules for wire cores.
à Attach safety stickers to glass leaves.
à Danger of injury with opened drive. Hair, clothing, cables, etc. can be drawn in by rotating parts.
à Danger of injury caused by unsecured crushing, impact, drawing-in or shearing spots.
à
Danger of injury due to broken glass!
à
Danger of injury due to sharp edges in the drive.
à
Danger of injury during installation through freely moving parts.
1.4 Inspection of the installed system
Measures for protection and prevention of pinching, impact, shearing or drawing-in spots:
à
Check the function of safety sensors and movement detectors.
à
Check protective earth connection to all metal parts that can be touched.
à
Perform a safety analysis (risk analysis).
1.5 Environmentally conscious working
à
When disposing of the door system, separate the different materials and have them recycled.
à Do not dispose of batteries and rechargeable batteries with household waste.
à Comply with the statutory regulations when disposing of the door system and the batteries/rechargeable
batteries.