ECdrive H
9
Pre-mounting
5.3 Installing stop buffers
Stop buffer: Pos. 13 in assembly group list, Chapter 4.4
X
Set stop buffers on the track on the left and
right (1).
X
Screw in the setscrews M6×6 (2) until they are in
contact with the track.
Do
not
tighten the setscrews.
The exact position of the stop buffers (1) is specified
during door leaf installation.
5.4 Installing the drive components
The exact positioning of the components is given on the drive drawings.
Illustrated: 1-leaf, ÖW = 700 mm
AL
Illustrated: 2-leaf, ÖW = 900 mm
AL
Legend:
AL
Drive length
ÖW
Opening width
UM
Deflection pulley motor gear unit
UR
Deflection pulley
X
Install the components with the screws provided in accordance with the drawing.
à
Deflection pulley torque 15 Nm
à
Torque for other components 10 Nm
