Geyser G-1U EURO, Руководство пользователя

Страница: 5 / 8

The type of filter connection to the faucet spout depends on the design of the mixing faucet.
If the faucet spout has aerator, remove it.
In case the faucet spout has an external M22xl screw thread, then the diverter is screwed
directly on the faucet spout.
In case the spout has an internal M24xl screw thread, diverter connects to the spout through
22/24 adapter.
If spout has no thread and its external diameter is 14-16 mm, then the diverter is connected
to the spout through the adapter IDA-01 (not shipped in the standard kit).
Before the first installation of the filter, tighten up the housing using the wrench (item
9): usually shipped not tightened.
After the first filling, filter should be turned upside-down. Wait for relieve to release,
and then put the filter back into operating position.
Before starting the operation: wash out the filter up to complete washing away of carbon
(or other) dust traces. Filter washing should be also done in the following cases:
a) after cartridge replacement;
b) after a long (more than 5 days) interruption in operation.
1. Lower cover-support
2. Housing
3. Decorative cap
4. Pure water tap
5. Diverter
6. Cartridge
7. Inner insert
8. Mineralizer
9. Wrench for housing
10. Wrench for cartridge screw cap
11. Hose
SET OF EQUIPMENT
1. Filter housing assembled.............................................................. 1pc
2. Wrench for housing .............................................................. 1pc
3. Wrench for screw cap of Aragon cartridge (except G-1UK euro)............... 1pc
4. Manual
5. Package
SERVICING THE FILTER