User Manual IR-1SP Micro
5
function button (A) at the same time but keep them pressed for approximately 2
seconds. IR-1SP Micro is now in another recording mode. Otherwise use the
same recording procedure.
Mounting
IR-1SP Micro can be used hanging on a strap around the neck. Remove the
string lock from the neck strap and pass the neck strap through the attachment
loop on the transmitter. Replace the string lock and adjust the length of the neck
strap.
Warning!
The string lock is a safety detail for the prevention of strangling. Check that the
neck strap ends can easily be drawn out if the transmitter gets caught on
something. Never make knots on the neck strap!
IR-1SP Micro can also be equipped with clips (article number 401130) which
make it possible to attach it to a belt or pocket. Clips can be obtained from Gewa
AB or a Gewa retailer.
Data Communication
If IR-1SP Micro is connected to a PC it is possible to change settings such as
delay time ON, delay time OFF and change to another GewaLink channel. You
can also back-up the information to the computer. To make a back-up possible
the program Gewa Prog III Utility must be installed. Program and data cable can
be ordered from Gewa AB or a Gewa retailer. Do the following to connect:
1.
Using a Phillips screwdriver, remove the bottom part of IR-1SP Micro by
loosing the screws.
2.
Connect the data cable (article no 406918) between the socket on the IR-1SP
Micro printed circuit board and the COM port of the PC.
3.
Open the program Gewa Prog III Windows Utility on the PC.
4.
Change the different settings.
Содержание IR-1SP Micro
Страница 1: ...User Manual IR 1SP Micro ...