USING YOUR WATER KETTLE
Place the unit on the level surface.
To fill the kettle, remove it from the power base and open
the lid by pressing the lid release button, fill with the
desired amount of water, and then close the lid.
Alternatively, the kettle may be filled through the spout.
The water level should not exceed MAX marks or sit below
MIN level. Too little water will cause the kettle switching off
before the water has boiled.
1.
2.
This appliance can be used by children aged from 8 years and
above if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are older
than 8 and supervised. Keep the appliance and its cord out of
reach of children aged less than 8 years.
KNOW YOUR WATER KETTLE
3.
4.
NOTE:
Do not fill the water over the maximum level, as
water may spill out of the spout when boiling. Ensure that
the lid is firmly in place before plugging the power outlet.
Position the kettle on the power base.
Connect the plug into a power outlet. Press down the
On/Off switch, the indicator will light up. Then the kettle
will start to boil the water, once the water has being boiled
the On/Off switch will be off automatically. You can shut off
the power by lifting the On/Off switch at any moment
during boiling water. If you want to boil water again, only
press down the On/Off switch directly to restart the kettle.
Lid decoration
Spout
Body
Power base
Handle Cover
Switch
Lid
Open lid button
