OVERHEATING PROTECTION
When in operation, air is released through the Air
Outlet Vent. KEEP YOUR HANDS AND FACE at a safe
distance from the Air Outlet Vent. Also avoid the air
while removing the Rotating Mesh Basket from the
appliance.
※Never unplug the appliance until 60S seconds pass
after appliance finishes working or during the working
process!
The Unit’s outer surfaces may become hot during use.
The Rotating Mesh Basket WILL BE HOT. WEAR OVEN
MITTS , or use the fetch tool when handling hot
components. Wear oven mitts when handling hot
surfaces.
Should the Unit emit black smoke, UNPLUG
IMMEDIATELY and wait for smoking to stop before
removing oven contents.
When time has run out, cooking will stop but the fan
WILL CONTINUE RUNNING for some seconds to “cool
down” the Unit.
Always operate the appliance on a horizontal surface
that is level, stable, and noncombustible.
This appliance is intended for normal household use
only. It is not intended for use in commercial or retail
environments.
21.
22.
23.
24.
25.
26.
If the Air Fryer Oven is used improperly or for
professional or semi-professional purposes or if it is
not used according to the instructions
in the user manual, the warranty becomes invalid and
we will not be held liable for damages.
Always unplug the appliance after use.
Let the appliance cool down for approximately 30
minutes before handling, cleaning, or storing.
Make sure the ingredients prepared in this Unit come
out cooked to a golden-yellow color rather than dark
or brown. Remove burnt remnants.
27.
28.
29.
30.
Should the inner temperature control system fail, the overheating
protection system will be activated and the Unit will not function.
Should this happen, unplug the power cord. Allow time for the
Unit to cool completely before restarting or storing.
AUTOMATIC SHUT-OFF
The appliance has a built in “shut-off” device, that will
automatically shut down the unit when the Timer LED reaches
zero. You can manually switch off the appliance by selecting the
Power Button. The fan will continue running for some seconds to
“cool down” the unit.
