Press Program button again and the word Time shows on
up-left corner of display.
Set the delayed starting time by pressing Hour and Minute
button repetitively, that is PM 8:15 (see Fig. 2).
After setting the presetting time, press the Program button
once, the letter TIMER on the LCD will disappear. The LCD
will display the current clock. The unit will begin to brewing
coffee when the delayed brew time come.
Press the on/off button once, the indicator in it will illumi-
nate blue .
NOTE:
You may cancel the automatic start function by
pressing on/off button once to stop machine, if you want
to brew coffee again immediately, you shall press on /off
button once to start brewing immediately. If you want to
change the automatic start time, only following the above
1-4 steps again.
When the time is due the indicator will illuminate green, then
the unit starts brewing. The appliance will be cut off power
automatically after two hours if it has not been manually
disconnected at the completion of brewing.
If the power supply has been broken off or unplug the power
cord unintentionally during operation, the appliance will be
continued previous operation automatically from the point
when the disconnection occurred provided that the pause
does not exceed 20s, even without pressing any button. In the
event the pause time exceeds 20, the display shows the default
setting, the appliance must be re-started.
Unplug from the mains.
MEMORY
CLEANING AND MAINTENANCE
3.
4.
5.
6.
1.
2.
CAUTION:
Before performing any cleaning operations, the
machine must be turned off and disconnected from the mains
power supply. Never immerse the coffee machine in water.
After each brew is complete and the coffee grounds have
cooled, discard the paper filter. Take out the removable filter
holder, rinse, and wash with soap and warm water. If using a
