background image

 
PROGRAMMING YOUR COFFEE MAKER – Automatic Operation 

 

SETTING THE CLOCK 

 

1.

 

You may set the clock any time before or after brewing. The time on the clock must be set 
prior to programming the Coffee Maker.  

 
2.

 

Press the HOUR and then the MIN buttons to set the current time. Press and hold the buttons 
to scroll through numbers quickly. When the number displayed approaches the desired 
setting, press and release the button to advance one digit at a time. Make sure the AM/PM 
indicator is set properly. 

 

Note

: AM is indicated in the upper left hand corner of the LED digital clock/display and PM 

in the lower left hand corner.  

 

SETTING THE AUTO BREW START TIME 

 

1.

 

In order to use the Auto Brew feature, you must first set the clock. Please see instruction 
above for setting the clock.  

 
2.

 

To set the desired Auto Brew start time, first press the PROGRAM button. The word 
PROGRAM will begin flashing on the LED digital clock/display to indicate an Auto Brew 
start time is being set. 

 
3.

 

Set the time you want the coffee to begin brewing by using the Hour and Min buttons, 
following the same directions for setting the clock. Make sure the AM/PM indicator is set 
properly. 

 

Note:

 After setting the Auto Brew start time, the PROGRAM indicator will automatically 

stop flashing after a few seconds and the display will return to the current time. 
 

4.

 

To confirm your Auto Brew start time, simply press the PROGRAM button and the pre-set 
time will be displayed for a few seconds on the LCD digital clock/display. The PROGRAM 
indicator will continue to flash while confirming the pre-set Auto Brew time. It will 
automatically return to the current time after a few seconds.  

 

5.

 

After setting the Auto Brew start time, prepare the coffee following the directions in 
preparation for use. 

 
6.

 

Press the AUTO ON button. The green Indicator Light encircling the button will illuminate  
and the word AUTO will be displayed in the upper right hand corner of the LCD digital 
clock/display.  

 
7.

 

Your Coffee Maker will automatically begin brewing at the pre-set time. When the brew 
cycle begins, the green Indicator Light encircling the AUTO ON button will go out and the 
red Indicator Light encircling the ON/OFF button will illuminate to indicate the Coffee Maker 
is in operation. 

 

Содержание CM-22 Series











Отзывы: