NOTE:
When you are holding down the PROGRAM button, the word BREW
will appear in the digital display.
Press the HOUR button to the desired hour.
Note: Be sure to check that
the AM/PM indicator, located in the left side of the digital clock display,
is also set to the correct time of day you want the Coffeemaker to begin
brewing.
Press the MIN button to the desired minute.
Release the PROGRAM button.
Make sure your current time is set correctly.
Press the On/Auto/Off button TWICE and the red AUTO light will go on. Your
Coffeemaker is now set to start brewing at the programmed time and Auto
appears in the display
If you are setting the unit to start brewing automatically, be sure that the unit
is filled with water, the Filter Basket Holder is securely closed, and that the
Carafe is sitting securely on the Carafe Holding Plate.
NOTE: Unplugging the unit will reset the clock to 12:00.
NOTE:
When the Coffeemaker is set to Auto, the word AUTO will appear in
the digital display.
OPERATING INSTRUCTIONS:
1. Place the Coffeemaker on a flat, level surface such as a countertop. Plug the
Coffeemaker into a 120 volt 60 Hz AC outlet.
2. Fill the Water Reservoir. Swing the Filter Basket Holder outward to your left
and insert a No. 4 Gevalia cone shaped paper filter into the Removable Filter
Basket. Place the desired amount of ground coffee into the paper filter. Brew
Gevalia Kaffe with the coffee/water ratio you normally use when you prepare
ground coffee (Experiment with the amount of coffee used in order to adjust
the flavor to your taste.)
3. Be sure that the Removable Filter Basket is seated properly in the Filter
Basket Holder, Swing the door closed and securely into place. Ensure there
is water in the Water Reservoir.
IMPORTANT:
Do not operate your Coffeemaker if the Filter Basket Holder is not
securely in place.
4. To brew coffee immediately, push the ON/AUTO/OFF button once. The green ON light
will illuminate and after a few moments the coffee will start to brew.
5. To set the Coffeemaker to start brewing at a certain time, hold down the PROGRAM
button. While holding down the PROGRAM button, push the MIN and HOUR buttons
to set the timer. Release the PROGRAM button. Once the timer is set to the correct
-7-
