Geuterbrueck EBC-2112 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 36

Geuterbrueck EBC-2112 Скачать руководство пользователя страница 14

G-Cam/E2 Series

Installation

13

3. CONNECTION

①

Power Connection

The device can be powered either via 12VDC or PoE.
To operate your camera using 12VDC, make sure that the polarity is correct before connecting the power

cable. Incorrect connection may cause damages to the device.
If the camera is powered via PoE, refer to

APPENDIX (B): POWER OVER ETHERNET

for more

information.

②

LAN Connection

The device has an RJ45 LAN connector for 10/100 Base-T Ethernet. Use the Ethernet cable (RJ45) to

connect the device to a hub or a router in the network. When the LAN cable is connected, the orange

LED light will become solide and green LED will blink every 250 millisecond.

③

Analogue Video Output Connection

Use a 75 ohm video coaxial cable to connect to a monitor’s analog video input and check the camera’s

connection and its image focus at the installation site.
To see the analogue video output, be sure to press the output configuration button (PAL/NTSC button).

Pressing the button cycles through no video out, PAL, and NTSC.

④

Audio Connection

The camera provides a mono audio input and output. Due to low audio output power, an amplified

speaker is recommended for enhanced sound. (Refrain from connecting a headphone or earphone

directly to the camera.)

⑤

Alarm Input / Alarm Output / RS-485

NTSC/PAL

Power connection

(DC12V or PoE)

RJ45 LAN connection

Analogue video output

Audio connection

DI COM DO DO‐

Alarm in/out

connection

RS-485 connection

«
...
12
13
14
15
16
...
»

Содержание EBC-2112





































Отзывы:

Нет отзывов