Geutebruck 0.02800, Руководство по установке

Страница: 8 / 14

G-Case/WPH Series
Installation
6
6.
Loosen the PG gland.
7.
If you need a network cable only, take the rubber seal
with one 6 mm bore. If 2 cables are needed use the seal
with 2 x 6 mm bore.
Choose one of the rubber seals and lead (e.g. only) the
network cable through these 3 components, as shown
here.
Press the seal into the plastic grommet – it snaps in
hearable. Stick the grommet into the gland and turn it
slowly.
The grommet has one position in which it snaps in.
Screw the PG cap a bit, pull the cable out of the wall mount
bracket smoothly and screw the PG cap tangible.
8.
Turn down the WPH onto the wall mount
bracket and fix it with both screws.