12
Installing the rail hook
To install the rail hook, proceed as follows:
For the VZ 20 rail hook, fasten the slack rope to
the nose (14).
Make sure that the slack rope (20) is in perfect
condition and is securely attached in the lug
(13).
Affix the hook (4) to the cable (25).
Pull the rail hook to the fastening point (12 or
26).
Align the rail hook so it is at right angles to the
rail (12).
Hook the rail into the fastening.
Removing the rail hook
WARNING
Risk of fractures or bruises when the rail
hook is triggered.
The impact velocity when triggered is over
1 m/s. The impact energy is over 500 J.
Wear protective clothing or PPE when
working on the rail hook.
Ensure compliance with all locally
applicable safety and accident
prevention regulations.
Only enter the area under the tank car
to attach or remove the rail hook.
Remove the rail hook from the rail after loading.
If you wish to empty or fill other tank cars, you can
keep the VZ 10 rail hook connected to the
compressed air supply.
If the VZ 10 rail hook will not be used for a
longer period, disconnect it from the
compressed air supply.
Troubleshooting
In the event of equipment malfunction, please
contact the manufacturer.
After operation
Removing external dirt deposits
Use fresh water and a cloth to remove dirt and
contaminants from the equipment body.
Maintaining the equipment
The equipment is maintenance-free.
Servicing the equipment and
installing spare parts
GESTRA offers equipment repairs in the event of
wear or damage. No spare parts are supplied.
