Commissioning the Terminal
continued
Connecting and Commissioning the Terminal
The main menu consists of the following items:
TEST
TEST MEASUREMENT
DATA EXCHANGE
QUIT
Under the menu item TEST you can check steam traps for loss of live steam. The respective data
records and test instructions must have been previously created on the PC. The test results will be
evaluated right after each trap test by the terminal.
Under the menu item TEST MEASUREMENT you can check and evaluate steam traps for loss of live
steam without prior creation of data records and preparation of test instructions. The test results are
only stored up till the next measurement.
Under the menu item DATA EXCHANGE information is exchanged between the PC and the terminal.
The data stored in the terminal can be organized on the PC. Test instructions are transferred from the
PC to the terminal and test results are sent back from the terminal to the PC. The test instructions
stored on the terminal can be deleted on the PC.
Use or to select (mark) the menu item in question and then press the ENTER key .
To switch off the equipment, choose menu item QUIT.
For more inforamtion refer to the Online Documentation of the TRAPtest software.
Switch on
Confirm
Go back
Cursor
10
