GESTRA SRL 6-50, Оригинальная инструкция по установке

Страница: 16 / 24

16
Changing standby and interval time
Action Indicator & ajdustor pad Function
Press button and simultaneously.
The password input box
opens.
To enter the password press and hold down
until the input line is activated and highlighted.
Briefly press . The input mask appears.
The input mask appears
and you can enter the
password 003503.
Use buttons to enter the password 003503.
To jump back and forth between the digits use
buttons .
To confirm the password press button
and then . The next mask appears.
The password is confirmed.
If the entered password is incorrect the system displays a flashing message:
Password incorrect.
You have
to enter the password within 60 seconds otherwise your entry will not be applied and you have to repeat the
procedure.
Start, Operation and Alarm
- continued -
SRL 6-50
- continued -
Fig. 6
SRL 6 - 5 0
ESC OK
PW input
0
Press ESC > 1
sec. and OK to
confirm
ESC
ESC
OK
OK
ESC
PW input
0 00000
Press ESC > 1
sec. and OK to
confirm
0
Start LED, green
(standby time)
Standby LED, amber
(purging time)
Stop LED, red
(deactivation)
Display &
adjustor pad
Service
Start
Standby
Stop
Purging
Val D OPEN:
Val E CLOSED:
Val F CLOSED: