GESTRA RHOMBUSline MK 45 A-1, Оригинальная инструкция по установке

Страница: 12 / 28

12
 Make sure that the equipment is safely mounted
and that all connections are made correctly.
Attention!
Malfunctions may occur if the equipment
or condensate line is insulated.

Make sure that the heat generated by
the equipment or the condensate line
is dissipated.
Operation
Do not work on the equipment while it is operating.
After operation
DANGER
If the equipment is used in contaminated
areas there is a risk of severe injuries or
death caused by harmful substances in or
on the equipment.

Only qualified personnel are allowed to
perform work on contaminated
equipment.
 Always wear the protective clothing
prescribed for contaminated areas
when working on the equipment.

Make sure that the equipment is
completely decontaminated before
carrying out any service work.
 Follow the pertinent instructions for
handling the hazardous substances in
question.
DANGER
Risk of extremely severe injury or death
due to burns, freezing or intoxication if
fluid escapes.

Make sure that connections and
valves are tight after any work on the
equipment.

Make sure that equipment gaskets are
intact.
Attention!
Frost damage may occur when the
installation is shut down.

Drain the equipment if ambient
temperatures below 0 °C (frost) are to
be expected.
Removing external dirt deposits

To remove dirt deposits rinse the equipment
with fresh water and wipe it with a clean, lint-
free cloth.

To remove any persistent residues use a
cleaning agent that is suitable for the material
and carefully wipe the equipment with a clean,
lint-free cloth.
Maintaining the equipment
You can check the equipment for correct operation
using the GESTRA ultrasonic measuring unit
VAPOPHONE
® .

For more details refer to the installation &
operating manual of the ultrasonic measuring
unit.
Continuous steam trap monitoring is recommended
for critical applications.
 For more details refer to the installation &
operating manual of the continuous steam trap
monitoring unit.
Servicing the equipment and
installing spare parts
You may exchange the following component parts
in case of wear or damage:

Membrane regulator capsule with nozzle insert,
complete

Membrane regulator capsule

Strainer

Cover gasket

Gasket