19
Basic Settings
The measuring range can be switch-selected between ≥ 0.5 µS/cm and ≥ 10 µS/cm by means of the
code switch
5
:
1. Undo screws
E
of the electrode terminal box and remove housing cover.
Fig. 6
Code switch 1 – 4 OFF
Measuring range
≥
0.5 µS/cm.
Code switch 1 – 4 ON
Measuring range
≥
10 µS/cm.
2. Replace cover
G
and fasten screws
E
.
Factory setting
The equipment features the following factory set default value:
Measuring range
≥
10
µ
S/cm
Selecting the measuring range
Attention
Screwdriver for cross head screws, size 1
Screwdriver for slotted screws, size 2.5, completely insulated according to VDE 0680
Do not damage the electronic components when setting the code switch!
Tools
