GESTRA NRG 10-52, Оригинальное руководство по установке и эксплуатации

Страница: 17 / 28

17 NRG 10-52, NRG 16-52 - USA - Installation & Operating Manual -
850696-00
Function
Function
Please enter function!
Electrode rod /
terminal
Length [mm]
Please enter length!
Electrode body Functional ground
e.g., MIN alarm 1
e.g., pump off 2
e.g., pump on 3
e.g., MAX alarm 4
Installation
Installing the NRG 10-52, NRG 16-52, step 1
1. Determine the measured lengths of the electrode tips, enter the dimensions in the
Functions table and mark with a scriber.
2. Cut electrode tips 1234 with a bolt cutter.
2. Deburr the end faces of the electrode tips.
3. Strip off 1.95 in (50 mm) of the PTFE insulation from the lower end of the electrode tip. Make
sure that the remaining insulation measures at least 1.2 in (30 mm), measured from the
lower edge of the screw thread, see Fig. 3.
Functions table