GESTRA BA 46, Оригинальная инструкция по установке

Страница: 13 / 48

13
Storing and transporting the
equipment
Attention!
Equipment can be damaged if stored or
transported improperly.

Close all openings with the sealing
plugs or covers supplied with the
equipment or use similar sealing
covers.

Protect the equipment against
moisture and corrosive atmospheres.

Please contact the manufacturer if the
specified transport and/or storage
requirements cannot be met.
Storing the equipment

Please observe the following items when storing
the equipment:

Do not store the equipment for more than 12
months.

Use the supplied sealing plugs or other suitable
seal caps in order to seal off all openings of the
equipment.

Protect the sealing surfaces and contact areas
against mechanical damage.

Protect the equipment and all components
against hard shocks and impacts.

Store the equipment only in closed rooms that
meet the following environmental conditions:

Air humidity below 50 %, not condensing

Indoor air: clean, salt-free and non-corrosive

Temperature 5–40 °C.

Make sure that all these requirements are
always met when storing the equipment.
 Please contact the manufacturer if you cannot
comply with the recommended storage
conditions.
Transporting the equipment
DANGER
Risk of bruises if the equipment or
component parts fall down.

Use suitable lifting gear when moving
or lifting the equipment and/or
component parts.
 Make sure that the equipment cannot
topple over.

Make sure that nobody is standing
below the lifted equipment.
The lifting gear must be of sufficient strength for
the equipment including the actuator.

Meet the requirements for storage also when
transporting the equipment.

Prior to transport seal off connections with
sealing plugs.
If you do not have the sealing plugs
supplied with the equipment use
appropriate seal caps to seal off the
connections.
 For short distances (only a few metres) you can
transport the equipment unpacked.

When transporting the equipment over larger
distances use the original packaging.

If you do not have the original packaging use a
box that protects the equipment adequately
against corrosion and physical damage.
For a short period of time the equipment
may be transported even if the
temperature is below 0 °C, provided that
the equipment is completely empty and
dry.