Windows NT 4.0 Configuration
46
4
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
NT.
Note
❒
The following procedure assumes that the printer drivers have already been
installed. This is the procedure to change the printer port to LPR.
❒
The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocol, see p.38 “Configuring TCP/IP
and IPP for Printing”.
AAAA
Click
[
Start
]
, point to
[
Settings
]
, and then click
[
Printers
]
.
BBBB
Click the icon of the printer you want to use. On the
[
File
]
menu, click
[
Prop-
erties
]
.
CCCC
Click the
[
Ports
]
tab, and then click
[
Add Port
]
.
DDDD
In the
[
Available Printer Ports
]
box, click “LPR Port”, and then click
[
New Port
]
.
Note
❒
If “LPR Port” does not appear, “Microsoft TCP/IP Printing” has not been
installed.
EEEE
Type the IP address of the Network Interface Board into the
[
Name or address
of server providing lpd
]
box.
FFFF
Type “lp” into the
[
Name of printer or print queue on that server
]
box, and then
click
[
OK
]
.
GGGG
Click
[
Close
]
.
HHHH
Make sure that the port name is displayed in the
[
Print to the following port(s)
]
box and the check box is selected, and then click
[
OK
]
.
Содержание P7126
Страница 16: ...xiv ...
Страница 28: ...Windows 95 98 Me Configuration 12 1 ...
