Gestetner Administrator Reference 1, Руководство администратора

Страница: 12 / 20

Configuring the Printer for the Network
8
2
K
If you use NetWare, select the
frame type for NetWare.
Select one of items below if neces-
sary.
• Auto (Default)
• Ethernet 802.3
• Ethernet 802.2
• Ethernet ll
• Ethernet SNAP
Note
❒
In most situations, use the de-
fault setting ("Auto"). When if
you first select "Auto", the
frame type first detected by the
printer is adopted. If the net-
work can use more than two
frame types, the printer may fail
to select the correct frame type if
"Auto" is selected. In this case,
select the appropriate frame
type.
A
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to display
"Frame Type (NW)".
Network Setup:
Frame Type (NW)
B
Press
{{{{
Enter
}}}}
.
The current setting appears on
the panel display.
Frame Type (NW):
*Auto
C
Press
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
to display the
frame type you want to use.
D
Press
{{{{
Enter
}}}}
.
L
Reset the printer to apply the settings.
A
Press
{{{{
On Line
}}}}
to enter the "Of-
fline" condition.
The Online indicator turns off.
B
Press
{{{{
Job Reset
}}}}
.
M
Print the configuration page to
check settings you have made.
A
Press
{{{{
Menu
}}}}
.
B
Press
{{{{U U U U}}}}
or
{{{{T T T T}}}}
to display
"List/Test Print".
C
After confirming that "Config.
Page" is on the display, press
{{{{
Enter
}}}}
.
D
Press
{{{{
Enter
}}}}
.
The configuration page is now
printed. Check the contents of
the configuration page.
E
Press
{{{{
On Line
}}}}
.
"Ready " appears on the panel display.
Ready
On Line Menu
Job Reset
Escape
#
Enter Form Feed
Power Error Data In
ZDJS022N
On Line Menu
Job Reset
Escape
#
Enter Form Feed
Power Error Data In
ZDJS023N