2
3
Introduction
Gesswein Power Hand 2X Recipro handpieces are manufactured to the highest stan-
dards available to provide many years of trouble-free service. Complete with Powerful
30V DC aircooled motors and sealed bearings. Backed by a limited warranty that covers
wear parts for 90 days and overall balance of parts for six months.
This DC electrically driven Recipro handpiece is designed to be used with Gesswein Power
Hand 2X Single, Standard, Dual, Jewelers’ Micromotor, Power Carver II and Bright-Cutting
Controllers. These controllers convert the Alternating Current (AC) power supply to a
variable Direct Current (DC) by means of an I.C. “transistorized” automatically controlled
circuit.
2
Specifications
Speed Range (RPM)
Dual or Single Controller*
0-117
Standard Controller
29-117
Input Voltage
3-30V
Length of Stroke
0-2.0mm
Max. Shaft Output (W/sec.)
Dual Controller
50
Standard Controller
32.5
Single Controller
33.8
Max. Stoppage Torque (ft.-lbs./N-m**)
Dual Controller
0.056/0.076
Standard Controller
0.048/0.065
Single Controller
0.053/0.072
Net Wt. (without power cord)
24 oz.
*Or Standard Controller with variable-speed foot rheostat
**Foot-pounds/Newton-meters
1.
Accessories
Included Accessories
A.
One Pin Tool
B.
One Allen Wrench
C.
One Bottle Spindle Oil
D.
One Assortment of Tool Holders, Bamboo Laps, PSA Chips and Felt Pads
Optional Accessories
A.
Handpiece Extension Cord (#510-1120): adds 6', or almost 2m, to the 1.7m hand-
piece cord
B.
Handpiece Cradle Rest (#510-1130): provides safe holding place for handpiece when
not in use
C.
Variable-Speed Foot Rheostat (#510-3100)
D.
On/Off Foot Switch (#510-3105)
145mm (5
3
⁄
4
")
130mm
(5
1
⁄
8
")
40mm (1
1
⁄
2
")
Fig. 1
