Gershoj Energia Kft.
Ady Endre u. 13.
·
2890 Tata
·
Hungary
Fax:
+36 34 381 107
·
Tel:
+36 30 894 6152
Mail: [email protected]
·
www.GershojEnergia.com
Oldal 5 - 7
Version 1.0
Button 0 :
Stop Working
Button 1 :
Low speed
Button 2 :
Medium speed
Button 3 :
High speed
(If the sun is limited, use this button to get max use of the Solar panel)
Timer :
Adjustable from 0 – 60 minutes adjustable
Oscillating Button
When the fan is working in speed, push this button to start or stop oscillating.
Height adjustment
Unscrew the height button to adjust the pole’s height as you need, then screw it on again.
Bracket angle adjustment
Use the 4 angle buttons to adjust the PV panel to the correct angle. If placed on the ground,
the shadow of the panel will show when you’re in the perfect 90 degrees angle to the sun.
PV solar panel
Connect the 30W panel plug terminal, push the speed button on and the fan starts working
with the free energy of the sun.
DC wire with clips
Connect this wire plug terminal and the alligator clips to the 12 V DC battery, push the speed
button on and the fan starts working.
Universal power supply
With the delivered screwdriver, set (turn) on the bottom side of the appliance the red
revolving switch to 12 V(output DC voltage).
Choose the Socket 5,5x2,5/12mm and plug it into the cable end-socket with the correct
polarity – arrow to arrow and
POSITIVE
middle (if you do not do this right, the fan will
rotate in reverse and can damage the fan).
POSITIVE