background image

6

 3.0 Accessories 

 

 Operating 

Instructions 

2. Attach the water inlet hose to the ma chine and 

place the other end of it in the water source.

3. Start the machine.
4. Detach the spray lance and activate the trigger of 

the spray lance. Keep the trig ger activated until 
water has come out for approx. 15 sec onds.

5. Remount the spray lance and the ma chine is 

ready for operation.

NOTE:

 The internal fi lter of the machine is not 

intended for the fi ltration of large quan ti ties of im-
purities. If the water contains leaves, sand or the 
like, an external suction fi lter should be mount ed. 
For further in for ma tion, please contact your near est 
Gerni dis trib u tor.

2.7  End of operation

1. Stop the machine by turning the start/stop switch 

(2) to pos. 

O

.

2. Disconnect the plug from the sock et.
3. Shut off the water supply and ac ti vate the trigger 

(5a) to relieve the machine of pres sure.

Concerning storage, please refer to section 5.0.

Standard Equipment  

Only use original accessories.
Nozzles

 

Attached with the bayonet 
coupling system. Stored on 
the ma chine.

Tornado

®

 PR (7) 

Universal adjustable nozzle. 

Turn to the left:

 

 high 

pres 

sure.

 

Turn to the right: 

 low 

pres 

sure.

Powerspeed

® 

 (8) 

Nozzle with rotating jet for 
stubborn dirt on hard sur-
 fac es. 

Optional Equipment

Drain &  

15 m long drain 

Tube cleaner 

& tube  clean er 
for the clean ing 
of tubes and 
drains.

Water-sand-

 For 

blasting equipment

  re moval 

of paint 
and rust.

 Sand 

avail a ble 
from do-it-yourself shops.

Patio Clean er

 

Equipment for quick and 
regular clean ing of horizontal 
(tiles etc.) and vertical sur-
 fac es.

Содержание Ultimate 130.1













Отзывы: