Gerni Super 130.2 S, Руководство пользователя, Страница: 4 / 21

4
Original instructions
safety only use original spare
parts from the manufacturer
or approved by the manufac-
turer.

High pressure hoses, fi ttings
and couplings are important
for the safety of the appli-
ance. Only use hoses, fi ttings
and couplings recommended
by the manufacturer.

Do not use the appliance
if a supply cord or impor-
tant parts of appliance are
damaged, e.g. safety device ,
high pressure hose and trig-
ger gun.

Remove the plug from the
socket outlet during cleaning
or maintenance and when
replacing parts or converting
the machine to another func-
tion.

The appliance is intended for
cleaning outdoors.

Appropriate ear protection
must be used.

Never use the machine in
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.

It is not allowed to clean
asbestos- containing surfaces
with high pressure.

WARNING! Risk of explo-
sion -Do not spray fl ammable
liquids.
 
Always swith off the mains
disconnecting switch when
leaving the machine unat-
tended.

This high pressure washer
must not be used at tempera-
tures below 0°C.
 
Never let any persons stand
under the product when
stored on the wall.
WARNING!
Inadequate extension cables
can be dangerous. If an exten-
sion cable is used, it shall be
suitable for outdoor use, and
the connection has to be kept
dry and off the ground. It is rec-
ommended that this is accom-
plished by means of a cable
reel which keeps the socket at
least 60 mm above the ground.
Cables on extension lead
drums should always be com-
pletely unwound to prevent the
cable from overheating.
Extension cables must comply
with the below-mentioned re-
quirements for length and cable
dimensions.
1.0 mm² max. 12.5 m
1.5 mm² max. 20 m
2.5 mm² max. 30 m

If the electric cable is
damaged, it must be re-
placed by the manufacturer
or his service agent or simi-
larly qualifi ed person in order
to avoid a hazard.
Mains power connection
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:

The electric installation shall
be made by a certifi ed elec-
trician and comply with IEC
364.

It is recommended that the
electric supply to this appli-
ance should include either a
residual current device that
will interrupt the supply if the
leakage current to earth ex-
ceeds 30 mA for 30 ms.
Water connection
Connection to the public mains
according to regulations.
Inlet hose can be connected
to the water mains with a max.
inlet pressure of 10 bar.
IMPORTANT! Only use wa-
ter without any impurities.
If
there is a risk of silt, sand or
sediment in the inlet water (i.e.
from your own well), an addi-
tional fi lter should be mounted.
Safety devices
Locking device on spray gun
(7a)
(see illustration at the end
of this manual) :
The spray gun features a lock-
ing device. When the button is
activated, the spray gun cannot
be ope rated.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
Pressure safety device
An integrated hydraulic safety
valve protects the system from
excessive pressure.