8
1)
Options / model variants
Original instructions
EN
3 Before starting the cleaner
1. The safest way to lift the
machine is to use a fork-lift
truck The arrows in the il-
lustration indicate the best
places to position the fork.
2. It is also possible to lift the
machine by hand from the
pallet. Due to the weight
this work should be done
by at least three persons.
Your hot water pressure washer was thoroughly tested and adjust-
ed for optimum performance before it left our factory. The factory
is located at approximately 120m (390 ft) above sea level, and the
combustion settings are optimal for that elevation.
If your location is higher than 1200m (3900 ft) above sea level,
your burner may require re-adjustment for proper performance and
best fuel economy. Contact your dealer for assistance.
1. Before using the cleaner
for the first time, check it
carefully for any faults or
damage.
2. Run the machine only when
it is in perfect working con-
dition.
3. Set the brake.
4. The slope on which the
high pressure cleaner is
placed must not exceed
more than 10
0
in any direc-
tion.
3.1
Transport and assem-
bly
3.2 Combustion
settings
3.3
Set the brake
CAUTION
Do not hold the plastic tank to lift the machine as it could become
detached from the frame.
The best places to hold the machine are:
•
on the handle
•
on the frame between the front wheels and the guide rollers.
