Gern Pro DAN0807, Инструкция по эксплуатации

Страница: 19 / 31

DAN0807
19
e) Do not overreach . Keep proper footing and balance at all times. This enables better control of the
tool in unexpected situations.
f) Press properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure thes e
are connected and properly used. Use of these devices can reduce dust-related hazards.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn in on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operation
different from those intended could result in a hazardous situation.
5. SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b) If the r eplacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
ADDITIONAL SAFETY POINT FOR YOUR BELT SANDER
1. Harmful/toxic dusts will arise from sanding e.g. lead painted surfaces, woods and metals. Contact with or
inhalation of these dusts can endanger the health of operator and bystanders. Always use eye glasses and
dust mask.
2. Hearing protection should be worn when using the sander.
3. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool
may contact hidden wiring or its own cord. Contact with a “live” wire will exposed metal parts of the tool
“live” and shock the operator.
4. Always wear safety glasses or eye shields when using the sander. Everyday eyeglasses have only
impact-resistant lenses; they are not safety glasses. Follow this rule will reduce the risk of serious
personal injury.