DAN0749
16
<0.348 Ohm, such disturbances are not expected. (In case of need, you may contact your local supply
authority for further information.
ELECTRICAL SAFETY
When using electric machines always observe the safety regulations applicable in your country to reduce the
risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed
safety instructions.
Always check that the power supply corresponds to the voltage on the rating plate.
Your machine is double insulated; therefore no earth wire is required
REPLACING CABLES OR PLUGS
Immediately throw away old cables or plugs when they have been replaced by new ones. It is dangerous to
insert the plug of a loose cable in the wall outlet.
USING EXTENSION CABLES
Only use an approved extension cable suitable for the power input of the machine. The minimum conductor
size is 1.5 mm2. When using a cable reel always unwind the reel completely.
3 .ASSEMBLY
Prior to mounting an accessory always unplug the tool.
ASSEMBLING THE HANDLE
Fig. 2
The handle is suitable for either left or right handed use.
• Install the handle in such way that the holes match the screw holes on the machine.
• Tighten the handle with the bolts and hexagon key.
ASSEMBLING ACCESSORIES
Fig. 3
• Press the spindle lock
• Screw and tighten the pad holder on the spindle
• Depress the spindle lock
• Mount the polishing pad onto the pad holder.
Содержание DAN0749
Страница 2: ...DAN0749 2 Fig 2 Fig 3 Fig 1 1 2 3 4 5 6...
Страница 3: ...DAN0749 3 1 2 Fig 4 Fig 5 Fig 6 A B...
Страница 19: ...DAN0749 19...
