Read all of these instructions before plugging in or turning on the UVC Air Sanitizer
1.
2.
Remove the front cover from the machine by pulling the bottom part of the front panel toward you.
3. Remove the air filters. Behind the filters you will find 4 UVC bulbs. Check to make sure they are not broken and have not
become disconnected during shipping. Replace filters and make sure they fit snugly. Replace front cover.
FAN SPEEDS
: You can manually adjust the 3 fan speeds by pressing the Fan Speed button until you obtain the desired fan
speed. Or set the sanitizer to auto and it will automatically adjust the fan speed as necessary when dirtier air is sensed.
The lowest setting can be used as gentle white noise at night for a quiet, restful sleep.
7.
8.
TIMER
: Press the button once to set the timer to turn off the machine in 1 hour. Press twice for 2 hours, 3 times for 3
hours, etc. Settings: 1-8 hours.
10. To manually turn on/off the UVC and ionizer functions individually, use the remote control (included)
9.
AUTO
: Press the button once and the fan speed will authomatically adjust for dirtier air
11. Always unplug the sanitizer from the outlet before removing cover
Be sure the sides, top and bottom of the UVC Air Sanitizer are not blocked or covered so that air can circulate in and out of
the machine.
*
You can read more about PM2.5 and what constitutes good, moderate, and poor air quality readings at
once to shut off auto mode
a.
b. twice to set the machine to sleep mode
c.
third time to reset to auto mode with UVC and ionizer functions off
4.
Plug the UVC Air Sanitizer into an electrical outlet.
5.
ON/OFF
: Turn on UVC Air Sanitizer using the touch screen display button or the remote control.
6.
MODE
: Press the button:
a.
When the machine first comes on, it will automatically be in Auto mode with UVC light and ionizer functions on.
No timers are set so the machine will run continuously until you turn it off manually or set a timer function.
b. Upon start up, the air quality sensor will alternate between poor, fair and good until it filters enough air through
the machine to obtain a PM2.5 reading. Initially, the PM2.5 reading will register as 4 flat lines (----) until the
sanitizer obtains a PM2.5 reading.
Instructions for Use
Display Functions/Buttons
Decibel Levels
On/Off
– Turn sanitizer on/off
Timer
– Sets time to shut off sanitizer (1-8 hours)
Mode
– Controls auto, settings
Fan Speed
- Adjust the 3 fan speeds
Remote Control Functions (see above for explanations)
On/Off
– Turn sanitizer on/off
Reset
– Remove all user settings and reset to default settings
Timer
– Sets time to shut off sanitizer (1-8 hours)
Speed
– Adjust the 3 fan speeds
Auto
– Turn on/off automatic setting
Sleep
– Turns on sleep mode (display off, quiet)
UVC
– Turn on/off UVC bulbs
Anion
– Turn on/off ionizer
3 Fan
Speeds
Air Quality
Display
PM2.5
Particulate
Monitor
Auto Shut-off
1,2,8 + 12
Hour Settings
Touch Screen
Controls
Sleep Mode
< 25 Decibles
Temperature
Display
Automatically
Adjusts for
Dirtier Air
Ionic Air
Filtration
UVC Light
Disinfection
Fan Speed
Mode
Timer
On/Off
AQI Good
Purify
Timer
Speed
Sleep
AUTO
Anion
UV
PM2.5
TEMPERATURE
AQI Poor
AQI Medium
F
H
UV
Fan Speeds:
Low
21db
Medium
28db
35db
High
Sanitize Rooms up to 645 square feet
EPA Co. No. 97721
Reset
Timer
Sleep
Speed Auto
Auto
On/Off
Sterilize
Anion
