Assembly
1. Open the battery case at the bottom of the outer bowl.
Insert four AA batteries. Mind polarity. Close the battery
case. (Pic.1)
2. Place the inner bowl into the body. (Pic.2)
3. Fill charcoal container with approx. 250g of Charcoal.
Put cover on charcoal container. (Pic.3)
4. Apply a circular layer of lighter gel on ignition plate,
approx.. 10mm (0.4 inches) wide. Place ignition plate
into inner bowl. (Pic.4)
5. Turn the knob clockwise to maximum position. (Pic.5)
IMPORTANT
In order not to quench the flame, the ventilation needs to
be turned on.
