P.40
Care and Maintenance
Notes:
- Pull out the filter gently.
- Removal of filter at back panel is at priority then for the filter at side panel, to avoid any twist or damage to
filter.
- Do not squash or hit the mesh with sharp objects or brush.
- Do not use the appliance without installing the filter.
Storage
Please store the air conditioner properly if not in use.
1. Screw off the drain cover and pull out the stopper to drain condensate water completely. Or tilt the unit to
drain water.
2. Keep unit running in fan mode for half day to dry inside of unit completely to prevent from going moldy.
3. Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug
into the universal fixing hole at the back panel of the unit, install the water stopper and drain cover.
4. Remove the heat exhaust hose to assembly, clean and keep it properly.
5. Take out the batteries from remote controller and place it in the remote control box.
Note:
Assure the unit is stored in a dry place. All accessories of the unit shall be protected together properly. Keep
the unit away from children.
Side filter frame
Lower filter
frame
Push
direction
Lower filter
Side filter
