P.8
P.9
NOTE:
- Before cleaning, please make sure the power plug is pulled out. Cleaning shall not be taken unless the body cools down.
- Before first use and after every use, clean each part thoroughly.
- Periodically check all parts before reassembly.
- Never immerse the jug or base in water or any other liquids.
- Do not use abrasive cleaners, bleaching agents or metal scourers on any parts. This will damage the appliance.
- Do not put any parts of the milk frother in the dishwasher.
- Do not use metal spoons or other utensils with sharp edges to spoon milk or froth from the appliance. These
will scratch the coating inside. Pour only.
- Store the milk frother with the power cable loosely coiled. Never wrap it tightly around the machine.
To clean the surface of the jug and the base, wipe with a clean, damp cloth and dry before storing. Rinse the
inside of the jug with hot soapy water, rinse with clean water and dry thoroughly. Do not use hard or sharp objects
to clean inside the jug, this will damage the non-stick coating.
To clean the whisk and holder, push the whisk out of the holder. Clean the lid, whisk and holder with warm soapy
water and a soft sponge or cloth. Rinse and dry thoroughly.
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Operating Instructions
WARM MILK
Heat 250ml of hot milk
1. Put the whisk into the whisk holder.
2. Fill milk and press the On/Off button twice. The button will light up and blink in red. This is the setting for milk-warming.
3. The whisk rotates with reduced speed in order to ensure even heat distribution and prevent the milk from burning.
NOTE:
Make sure the Milk Frother is filled to at least the MIN mark and not exceed the MAX MILK marking.
Otherwise the motor will burn dry or overflow.
SETTINGS
Operation
Indicator
Function
Press On/Off button
Light up in red
Warm milk froth
Press On/Off button for 2S
Light up in blue
Cold milk forth
Press On/Off button twice
Blink in red
Warm milk
WARNING
- Ensure the lid is fully closed before switching on. Do not open the lid when milk is heating, scalding may occur if the lid is lifted.
- Do not touch any moving parts whilst in use. Always switch off the appliance and wait until the whisk has
stopped rotating before you open the lid.
- Remove the Milk Frother from the base to fill or pour. Pour slowly and do not over-tilt the Milk Frother.
A GUIDE TO INGREDIENTS
Different milks, for example UHT long life, fresh semi-skimmed milk and whole milk will all froth to different levels so
you may need to reduce the amount of milk you use.
• Semi-skimmed milk often gives the best results for frothing.
• Add your other ingredients (for example, coffee, drinking chocolate, sugar) to your mug and pour the warmed milk
on top of them. Do not put the additions into the Milk Frother as the sugars may cause it to overheat.
USER TIPS
• Only heat milk in the Milk Frother. Do not put other ingredients, such as drinking chocolate, coffee or sugar into the
Milk Frother.
• Certain types of milk, for example long life, can froth more than others, so your milk may leak out - reduce the
amount of this kind of milk.
• Rinse the jug as soon as you have finished using it and it will be easier to clean.
Care & Maintenance
Cleaning Video
Tutorial
