German pool KQB-315, Руководство пользователя

Страница: 16 / 19

P.30 P.31
Operating Instructions
1. When using the product for the first time, the fan does not operate at first. The fan only operates after
a while. Is this a fault?
To ensure speedy cooking, the fan only works when the heating element is at a certain temperature.
After use, to prevent temperature rising on the heating arm, the fan will continue to run for about 5
minutes after power is switched off. Wait for the fan to stop operation before unplugging the appliance.
2. The heating arm emits odour and smoke when the appliance is used for the first time after purchase.
This is a common phenomenon (called ageing) shared between grill pans and electric grill pans. Ageing
refers to a short period in which various parts become stabilised. After the second or third use, this
phenomenon should stop. However, if the infrared heating element or the heating arm is contaminated
with grease or other objects, this phenomenon may occur during the next usage. Please take care of the
cleanliness of the heating arm.
3. After grilling belly pork, there are a lot of excess grease on the pan bottom.
If the oil reservoir is locked well, a “click” sound can be heard. Please ensure the oil reservoir is in the
correct position otherwise grease may spill during operation. After using this product, let the oil reservoir
cool down. Any stored excess grease can be poured out from the oil reservoir via the oil inlet. When
using the 360-Degree Circular Rotational Grill Pan (equipped with an oil drain), the oil reservoir must be
inserted inside the slot.
Operating Instructions
Frequently Asked Questions
1. Place main unit on a level surface, and properly install grill pan or other accessories.
2. Connect one end of the power cable to the main unit and the other to the power socket. Make sure your
household power supply is compatible with that required of the appliance.
Stand-by Mode
3. Turn on the Power Switch, the buzzer sounds once, display slowly lights up. Upper part of display indi -
cates ‘88’ and the lower part ‘888’, the numbers flash 3 times, appliance is in stand-by mode.
4. In stand-by mode, ‘88’ and ‘888’ turn into ‘—’ and ‘---’ respectively, other icons light up.
5. During stand-by mode, appliance enters energy-saving mode if it is idle for 60 seconds.
Operation Mode
1. In stand-by mode, press Start/Stop button, the default setting is 280
℃
without time display, press Start/
Stop, the appliance will operate at 280
℃
and no time limitation. If you want to set Time/Temperature,
you can press Time/Temp button once, adjust time or temperature by pressing ‘+’ or ‘-’, then press Start/
Stop to start operation. Countdown is shown on upper part of display, and temperature on the lower
part.
2. Preheat for 5 minutes, then begin the cooking process.
3. During operation, press Time/Temperature button once, upper part of display flashes, adjust time by press -
ing ‘+’ or ‘-’. Press Time/Temperature button again, lower part of display flashes, adjust temperature by
pressing ‘+’ or ‘-’. After inputting all settings, display flashes 5 times, operation and countdown resume.
4. During operation, press Start/Stop button once to cease operation and appliance goes into stand-by
mode. Fan will continue to work for 5 minutes. Wait till appliance has completely cool down to turn off
Power Switch. Leave the Power Switch on if cooking will be resumed shortly.
Energy-Saving Mode
During stand-by mode, appliance enters energy-saving mode if it is idle for 60 seconds. The logo lights up and
other indicators go off.
Fan Ventilation System
When operation starts, the fan is activated simultaneously. When operation stops, the fan will stop 5 minutes
afterwards
Buzzer Alert
In Operation Button Press End of Countdown Error
Buzzer sounds once Buzzer sounds once Buzzer sounds 3 times Buzzer sounds 10 times