German pool JUS-102, Руководство пользователя

Страница: 11 / 17

P.21 P.20
Operating Instructions
Before making juice, adjust the regulating valve
to the suitable position. (See regulating valve
instruction for details)
Press the power switch to “FWD” position.
Put the ingredients into the hopper, push
them with the pusher.
Push regulating valve to half-open position
before putting the last ingredients into the hopper.
(Take out the pulp, then easy to open the hopper)
When finish making juice, switch to “Stop”
position, and the machine stops working.
Caution: Before pressing to “FWD” or “REV”
position, please make sure the auger fully stops,
and then to another side.
1
3
2
4
5
Ready, juice-making mode OFF
For most ingredients, switch the valve to OFF
position, the squeezing effect is better.
Squeeze fruit with core like grape, raspberry,
pomegranate etc., switch the valve to OFF position
and then start to make juice. When juice begins
to flow, switch the valve to half-open position to
continue squeezing.
Finish, Simple cleaning mode Half-Open
Switch the regulating valve to half-open position
before putting the last ingredients into the hopper
in order to take out the pulp. Only when the pulp is
taken out, the hopper can be opened.
When do simple cleaning, switch the valve to half-
open position and take out the pulp.
Cleaning mode ON
Switch the regulating valve to ON position, and
then you can disassemble the chamber to clean.
Push the power switch to “REV” position, the juicer works to move the stuck food back to the top. It
reverses when press. Once without pressing, it stops working.
Under “FWD” or “REV” operation, make sure the auger fully stops running before push the power
switch to the other side.
Caution: Before push the power switch to “REV” position, make sure the auger fully stops running. The
motor will stop slowly instead of stop immediately due to the safety concerns.
Operating Instructions
Regulating Valve
Power Switch
FWD STOP REV