P.21
P.20
Care & Maintenance
1.
Clean the appliance after every usage. Unplug the device and remove the
condensate water in the drip tray before cleaning the steamer.
2.
To avoid damaging the unit, do not use any cleaning agents such as soap,
gasoline, thinner, alcohol, bleach, polishing powder, metallic brush, nylon
brush and steel scourer to clean any part of the appliance.
3.
Never immerse the appliance into water or wash it under running water.
4.
Clean the steaming baskets, steamer lid and steam racks with water, and
wipe it with a soft dry cloth. Only the metallic parts are dishwasher safe.
5.
Make sure all the accessories are dirt-free and properly dried before putting them aside for storage.
Descaling the Foldable Steamer
Deposit of precipitate in the steam generator is a normal phenomenon after one and a half to two
months’ application (There might be difference according to actual usage and water used). The
amount of precipitate depends on the hardness of water. Regular descaling is essential to extend the
appliance’s service life. (Pure water is recommended).
The unit has auto alert function for cleaning. When the display shows “
” icon, it means the unit
should be cleaned before usage.
1.
Pour 1500ml mixture of dedicated descaling agent and water into the water tank, (or 1500ml
mixture of white vinegar and water at the volume ratio of 1: 4) (Do not use other chemicals);
2.
Turn on the appliance. Start cleaning by pressing “
” button;
3.
When the cleaning process finishes, the “
” icon will disappear automatically from the display;
4.
After cleaning, fill the water tank with pure water and steam for 10 minutes before cooking.
Cleaning Video Tutorial
Trouble Shooting
Product Specifications
Model
JET-920
Voltage
220 - 240 V
Frequency
50 Hz
Power
1,500W
Dimensions (Folded)
(H) 430 mm (W) 310 mm (D) 97 mm
Net Weight
6.7 kg
Issues
Possible causes
Solutions
No steam is observed
1.
The appliance is not activated.
2.
The unit is not plugged securely.
3.
Power is not available.
4.
Empty water tank.
1.
Power up the appliance.
2.
Insert the power plug again.
3.
Connect to power.
4.
Fill water into the water tank.
No steam is observed
when it is started
•
A protective measure to delay
steam generation.
•
Wait about 25 seconds for
steam to be generated.
The unit alarms and
emits sounds of “Beep”
1.
No water in the water tank
2.
With water in the tank, the air
in the pipe is not discharged,
which results in water level
detect error.
1.
Fill water into the water tank.
2.
Remove the water tank, add
a little water to discharge the
air and then install it back to
the unit.
The power indicator
does not light up
•
The appliance is not activated.
•
Power up the appliance.
The unit alarms and
emits sounds of
“Beep”, and the display
shows “
” at the
same time
•
The unit needs descaling.
•
Descale the steamer
according to instructions
descriped in "Care &
Maintenace"
Water tank is aleak
•
The valve is stuck by items.
•
Remove the items.
Unable to fold the
steamer
•
High temperature environment
will weaken the magnetic force.
•
Cool it down before putting it
aside for storage.
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.
Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions.
If the following problems are encountered, follow the instructions below. If the problem persists, please
contact our Customer Services and Repair Centre.
Note:
For safety purpose, any unauthorised attempt to dismantle the product is prohibited.
