Model
IRS-210
Voltage/Frequency
220 V / 50 Hz
Power
1,000 W
Water Tank Volume
50 ml
Start-Up Time
Approx. 80 Seconds
Product Dimensions
(H)150 x (W)92 x (D)211 mm
Packing Dimensions
(H)120 x (W)260 x (D)185 mm
Net Weight
900 g
Gross Weight
1200 g
Troubleshooting
Technical Specification
Issue
Possible cause(s)
Solution(s)
Soleplate does not
heat up
Plugged incorrectly or
no electricity
Check if the plug is plugged correctly and if the wall socket is
working properly
No steam is
produced
Plugged incorrectly or
no electricity
Check if the plug is plugged correctly and if the wall socket is
working properly
Preheat process
incomplete
Preheat for approx. 80 seconds
Steam Ironing Mode
inactivated
Press Power button to activate Steam Ironing Mode after
preheating
Water level of water tank
too low
Pull the plug and add water to the water tank
Water droplets
dripped out from
steam nozzle
Preheat process
incomplete
Preheat for approx. 80 seconds
Water leakage at
Power button and
nearby area
Lid of water tank not
closed properly
Ensure the lid is closed properly
Auto-switched to dry
ironing mode
Steam Ironing Mode
running for too long,
reminder for adding
water
Pull the plug and add water to the water tank
Auto-switched to
standby status
Dry Ironing Mode
running for too long
Switch to Dry Ironing Mode again
Water-drawing
sound or handle
vibrating
All water in the water
tank has been used up
Pull the plug and add water to the water tank
Steam stains on gar-
ments or impurities
come out from the
steam nozzle during
ironing
Poor water quality or the
tank is filled with other
liquids, additives or
descaling agents
Only use filtered water, pure water or distilled water when filling
the water tank
Sterilization light
does not light up
Not in Sterilization Mode
Long-press Power button for 3 seconds in standby status to
enter Sterilization Mode
WARNING!
If troubleshooting fails, please contact our Customer Service & Repair
Centre. DO NOT attempt to dismantle the appliance.
10
11
UVC
Steam Iron | IRS-210