German pool HTW-330, Руководство пользователя, Страница: 11 / 28

P.11
Operation Instructions
Attention: This product is equipped with an internal fan for heat dissipation. As long as the PTC ceramic
heating element is working, the cooling fan will keep operating. The fan will continue to operate for 10
seconds after PTC stops working.
1. Connect to power source, turn on the switch located at the bottom of the
product. A sound will be emitted and the product will enter standby mode.
2. On standby mode, only is functional. Press to turn on the product,
press it again to switch off the device. Upon powering the product, the
default mode is set as:
• PTC Heating Element: On low power (eco mode) with LOW indicator on and
HIGH indicator off.
• COOL indicator is off.
• TIMER indicator is off, and the product is on continuous mode.
3. When the product is on, press to switch from low power to high power. Pressing again will
switch back to low power.
• Low power – eco mode: LOW indicator lights up
• High power – powerful mode: HIGH indicator lights up
4. When the product is on, press and the COOL indicator lights up. The heating element is
turned off while the fan keeps operating. Press it again and the COOL indicator goes out. The
heating function will be run on previous working mode.
5. When the product is on, press to set the timer.
• Press to cycle among “1h, 2h, 4h, 8h, OFF”.
• The timer starts immediately after setting the work time. Once the timer ends, the product will
be automatically switched off and enter standby mode.
6. When the product is on, press , UVC turns on. Press again to turn off UVC.
Watch the video clip