19
A
B
1
2
3
Fig. 5.2
Fig. 5.3
MANUAL COOKING WITHOUT
PROGRAMMER
(fig. 5.3)
To manually use the oven, without the
programmer, the numbers on the display
do not have to flash and the inner hands
do not have to be lit (none semi-
automatic or automatic program set).
A. Fig. 5.3 - Programmer with a set
program. To cancel the set program
press button
for about 2 seconds;
inner hands disappears on the display
and the oven can be used in manual
mode.
B. Fig. 5.3 - Flashing numbers on the
display (normally after turning off the
buzzer which indicates the end of a
programmed cooking). Press
button. The numbers stop flashing and
the oven can be used in manual
mode.
Attention: At the end of the cooking
switch off the oven manually by
turning the function and temperature
control knobs to the "0" (OFF) position.
CLOCK
(fig. 5.2)
1. Fig. 5.2 - Upon immediate connection
of the oven or after a power cut (black
out), the numbers on the programmer
display will flash.
2. Fig. 5.2 - To set the time, press button
for about one second; one hand
appears on 12.
3. Fig. 5.2 - Within 7 seconds press
or
buttons to set the time of the
day (hours and minutes). Seven
seconds after the last selection, the
seconds hand appears on the display.
Note: If the clock is reset it deletes
any previously set program.
2 seconds
2 seconds
or
