German pool GIC-MS28T, Руководство по эксплуатации

Страница: 5 / 7

P.8
清潔與保養
Care & Maintenance
• 清潔前必須先關閉總電源開關，並拔下電
源插頭。
• 任何污垢必須即時清理。
• 必須待爐面完全冷卻才進行清潔。
• 清潔面板時，先以扭乾的濕布擦拭；若仍
未能除掉污漬，可用中性去污粉或洗潔精
擦拭，然後再用濕布擦拭即可。
• 清潔電磁爐機身時，先用柔軟濕布擦；若
有油污難以清除時，用中性洗潔精擦拭後
再用濕布擦拭乾淨。
• 切勿用水直接沖洗或將機身浸入水中清洗。
• 切勿使用堅硬之刷子刷洗爐面。
• 切勿使用有機溶劑或苯等化學藥品擦拭電
磁爐。
•
Before cleaning, switch off the main power and then
disconnect the power plug.
•
Any stain or deposit on the cook-top surface must
be cleaned off immediately before reusing.
•
Cleaning must be done when cook-top surface has
completely cooled down.
•
To clean the cook-top, wipe with a dry cloth. If
stain remains, clean with a moist sponge
soaked with mild soap, and then wipe again with
a moist cloth.
•
To clean the body of induction cooker, wipe with a
soft moist cloth. If stain remains, clean with a
moist sponge soaked with mild soap, and then
wipe with a moist cloth.
•
Do not immerse induction cooker into water.
•
Do not clean cook-top with any rough cloth or
abrasive tool.
•
Do not use organic solvents or any cleaning
products that contain chemicals such as Benzene.
Note : Over time, cook-top panel may be
discoloured due to one of the following
situations. Operation of induction cooker
would not be affected as this is normal.
•
Overheating or burning empty cookware
•
Spillage not cleaned immediately
•
Cookware not clean
•
Long period of usage
注意︰ 以下幾種情況會造成玻璃面板變色，
實屬正常，不會影響電磁爐正常使用﹕
•加熱乾燒時
•加熱湯水外溢未能及時擦淨
•使用不潔淨底部鍋具加熱時
•長時間使用
P.9
清潔與保養
Care & Maintenance
• 清潔前必須先關閉總電源開關，並拔下電
源插頭。
• 任何污垢必須即時清理。
• 必須待爐面完全冷卻才進行清潔。
• 清潔面板時，先以扭乾的濕布擦拭；若仍
未能除掉污漬，可用中性去污粉或洗潔精
擦拭，然後再用濕布擦拭即可。
• 清潔電磁爐機身時，先用柔軟濕布擦；若
有油污難以清除時，用中性洗潔精擦拭後
再用濕布擦拭乾淨。
• 切勿用水直接沖洗或將機身浸入水中清洗。
• 切勿使用堅硬之刷子刷洗爐面。
• 切勿使用有機溶劑或苯等化學藥品擦拭電
磁爐。
•
Before cleaning, switch off the main power and then
disconnect the power plug.
•
Any stain or deposit on the cook-top surface must
be cleaned off immediately before reusing.
•
Cleaning must be done when cook-top surface has
completely cooled down.
•
To clean the cook-top, wipe with a dry cloth. If
stain remains, clean with a moist sponge
soaked with mild soap, and then wipe again with
a moist cloth.
•
To clean the body of induction cooker, wipe with a
soft moist cloth. If stain remains, clean with a
moist sponge soaked with mild soap, and then
wipe with a moist cloth.
•
Do not immerse induction cooker into water.
•
Do not clean cook-top with any rough cloth or
abrasive tool.
•
Do not use organic solvents or any cleaning
products that contain chemicals such as Benzene.
Note : Over time, cook-top panel may be
discoloured due to one of the following
situations. Operation of induction cooker
would not be affected as this is normal.
•
Overheating or burning empty cookware
•
Spillage not cleaned immediately
•
Cookware not clean
•
Long period of usage
注意︰ 以下幾種情況會造成玻璃面板變色，
實屬正常，不會影響電磁爐正常使用﹕
•加熱乾燒時
•加熱湯水外溢未能及時擦淨
•使用不潔淨底部鍋具加熱時
•長時間使用
常見故障及處理
Troubleshooting
When you run into any problem operating this product, use the table below to troubleshoot the problem.
If the problem persists, contact our Repairs & Customer Service Centre.
“ ”
Power is connected and Main
On/Off switch is turned on, but the
induction cooker does not respond
when the On/Off button is pressed. Is there a power
shortage in your area?
Is there a short circuit in the
power source of your home?
Is the power plug too loose
or not connected well?
Try again after power supply resumes.
Find out the cause of short circuit
and eliminate it before switching on
the cooker again.
Re-connect the plug or replace the
power jack.
Buzzer beeps continuously and pan
is not heated.
Is the pan not suitable for
induction cooking?
Is the pan positioned properly?
Use an appropriate pan.
Position the pan in the centre of
cook-top.
Induction cooker stops heating
during normal operations.
Is the pan empty or cooking
temperature too high?
Are the air inlet and outlet
being blocked?
Is the surrounding temperature
too high?
Avoid operating cooker with an
empty pan. Let cooker cool down
before switching it on again.
Remove obstruction from the vent.
Let induction cooker cool down and
try again.
Try again after the room cools down.
Tempe rature fluctu ates.
Is pan bottom not flat?
Replace pan with a fla t-bottomed one.
* Above table enlists the most common problems regarding the operations of the product and their possible causes as well as suggested solutions.
It is strictly for users’ reference only.
* Should there be any product malfunction or breakdown, DO NOT repair it yourself. Contact our Repairs & Customer Service Centre or consult a
licensed technician immediately.