German pool GIC-CS28B-S, Руководство пользователя

Страница: 5 / 11

P.9 P.8
Operating Procedures
1. Put the power plug into the socket. Switch on the “Main ON/OFF switch”, a beep sound will be
heard.The induction cooker enters standby mode. If no button is pressed for 30s, induction cooker
will automatically enters sleeping mode.
2. Place cookware onto the centre of the cook-top panel. Press “+/–” switch to enter “Heating” mode
(preset as power level 3).
3. Under “Heating” mode, press “+/–” key to adjust power level. Press “+” key 3s to “HH”, the max
level.
4. The induction cooker will limit the power automatically when the inappropriate cookware is put on,
the pressing of “+” key will not available and the “Empty or Improper Cookware Indicator” and “E1”
will flash as a warning.
5. Under “Heating” mode, pres.s “TIMER” key to enter “Timed Heating” mode. Within 5 seconds
of pressing the key, “Timing” Indicator will flash and show a flashing “0:30”. Press “-/+” to adjust
heating time (1 minute – 9 hours 59 minutes). The unit of adjustment is 1 minute. Press for a longer
while to increase the unit of adjustment. After 5 seconds of adjusting, “Timing” Indicator will change
from flashing to lighting up. The time is set.
6. Under “Timed Heating” mode, press “TIMER” key to enter “Heating” mode .
7. When induction cooker is operating, press “LOCK/UNLOCK” key to enter “Lock” mode. Press this
key again for 3 seconds to enter “Unlock” mode.
8. When induction cooker is operating, press “ON/OFF” switch to stop operating and enter “Sleep”
mode.
9. In the following conditions, induction cooker will automatically exit “Heating” and enter “Standby”
mode:
- (Under “Heating” mode) no appropriate cookware is placed on the cook-top for 30 seconds
- (Under “Heating” mode) no button is pressed for 120 minutes
- The another abnormal situations. Under the “Standby” mode, the induction cooker will enter the
“sleeping” after 30s.
10. When finish, press “ON/OFF” switch to turn off induction cooker.
Fault Code Fault Description Fault Code Fault Description
E0 Internal circuit error E4 Under-voltage
E1
Without cookware or incompatibile
cookware used
E5 Top plate sensor open/short circuit
E2 IGBT overheat E6 IGBT senor open /short circuit
E3 Over-voltage E7 Top plate overheat
*E3 & E4 are not product errors. Operation can be resumed when power voltage returns to normal
rating (170V - 250V).
Fault Code and Description
Cleaning & Maintenance
• Power plug must be disconnected before cleaning.
• Any stain or deposit on the cook-top surface must be cleaned off immediately before reusing.
• Cleaning must be done when cook-top surface has completely cooled down.
• To clean the cook-top, wipe with a dry cloth. If stain remains, clean with a moist sponge soaked
with mild soap, and then wipe again with a moist cloth.
• To clean the body of induction cooker, wipe with a soft moist cloth. If stain remains, clean with a
moist sponge soaked with mild soap, and then wipe with a moist cloth.
• Do not immerse induction cooker into water.
• Do not clean cook-top with any rough cloth or abrasive tool.
• Do not use organic solvents or any cleaning products that contain chemicals such as Benzene.
Note: Over time, cook-top panel may be discoloured due to one of the following situations. Operation of
induction cooker would not be affected as this is normal.
• Overheating or burning empty cookware
• Spillage not cleaned immediately
• Cookware not clean
• Long period of usage
Troubleshooting
When you run into any problem operating this product, use the table below to troubleshoot the problem.
If the problem persists, contact our Repairs & Customer Service Centre.
Phenomenon Check-up Items Solution
Power is connected and Main
on/off switch is turned on,but
the induction cooker does
not respond when the on/off
button is pressed.
•
I
s there a power shortage
in your area?
•
Is there a short circuit in
the power source of your
home?
•
Is the power plug too loose
or not connected well?
•
Try again after power supply
resumes.
•
Find out the cause of short
circuit and eliminate it before
switching on the cooker again.
•
Re-connect the plug or replace
the power jack.
Buzzer beeps continuously and
pan is not heated.
•
Is the pan not suitable for
induction cooking?
•
Is the pan positioned
properly?
•
Use an appropriate pan.
•
Position the pan in the centre
of cook-top.
Induction cooker stops heating
during normal operations.
•
Is the pan empty or cook-
ing temperature too high?
•
Are the air inlet and outlet
being blocked?
•
Is the surrounding temper-
ature too high?
•
Avoid operating cooker with
an empty pan. Let cooker cool
down before switching it on
again.
•
Remove obstruction from the
vent. Let induction cooker cool
down and try again.
•
Try again after the room cools
down.
Temperature fluctuates. •
I
s pan bottom not flat?
• Replace pan with a flat-bot -
tomed one.
•
Above table enlists the most common problems regarding the operations of the product and their possi-
ble causes as well as suggested solutions. It is strictly for users’ reference only.
•
Should there be any product malfunction or breakdown, DO NOT repair it yourself. Contact our
Repairs & Customer Service Centre or consult a licensed technician immediately.