German pool FSL-103, Руководство пользователя, Страница: 6 / 24

1.
3. 4.
5. 6.
OF
OF
2.
OF
OF
0.1 EO
EO
During the process of cooking, press
“ ” can cancel the function
immediately. The screen will show
“OF” , the machine going back to
standby status.
AUTOMATIC KEEPING WARM
When the cooking is done, the appliance will beep for 4 times, after repeating 3
sets of 4 beeps, it will go into “keep warm” mode. The light for “keep warm” will
be on. If keeping warm is not necessary
,
can press “ ” , so the appliance is
going back to standby status, showing “OF”. (Figure 5)
When automatic keep warm of 2 hours have completed, the appliance is going
back to standby status, showing “OF” , and alerting the user with beeping sound.
If no further instructions are received, the appliance will alert the user with
beeping sound every half an hour. If no other operation is required, please turn off
the appliance and unplug the power.
Attention
！
When keeping warm, if the area in the body around the heating plate has
dried up, the screen will show “EO” with continuous beeping sound. If keep warm is
still required, please add water and set the function again. (Figure 6)
Attention ！ In the state of function selection, the “ ” button is invalid. If you
need to use the Timer function, you must press “ ” to return to the standby
state of “OF”
Attention ！ If the appliance is to be opened during the cooking process, please be careful
that the steam is hot and the boiling water in the body might splash and injure your hand.
3. Put the top cover of the appliance in place, plug in electricity, the display panel
should show “OF” to indicate standby status. (Figure 1)
4. Press the “ ” key to choose the required function. When “ ” key is
pressed, the corresponding lights of the functions will be turned on and off
one by one. The functions are: Steam, Heat, Soup, Cognee, Dessert and Keep
Warm. (Figure 2)
5. Once the required function has been selected, can press “ ” to adjust the
cooking time. (Figure 3)
Attention ！ The screen showing “0.1” equals to 6 minutes and the screen
showing “1.0” equals to 60 minutes.
6. After setting the time, the indication light will flash for ten seconds and then it will
be on permanently, indicate cooking has started. During the process of cooking,
the remaining time is shown on the screen.
Attention
！
During the process of cooking, if the area in the body around the
heating plate has dried up, the screen will show “EO” with continuous beeping
sound. If cooking or keep warm is still required, please add water and set the
function again. (Figure 4)
B E N T O S T E A M C O O K E R F S L - 1 0 3
6