German pool EFB-426HM, Руководство пользователя, Страница: 12 / 32

P.12
Operating Instructions
Warm Mode
1. Press “Warm Mode” Button and the display shows the ambient temperature.
2. Press “+ / -” Buttons on the right side to set the temperature, and the digital display will be
flashing, which can be set to 1-30°C.
3. 10 seconds after the desired temperature is set, the flashing will stop.
4. The temperature being set should be higher than the ambient temperature, so that the heating
function will be turned on.
5. When the ambient temperature reaches the set temperature, the heating function will stop and
turn into a cool breeze.
6. When ambient temperature dropped to be lower than the set temperature, the heating function
will automatically be activated.
Note: The default temperature of the setting is 25 °C.
In Warm Mode, when the ambient temperature is below 0°C, the display only shows 01, does not
display negative temperature value.
After Warm Mode has run over 9 hours, the machine will automatically stop running. Restart by
pressing the host On/Off Button on the Body or by using the Remote Control.
Set Temperature > Ambient Temperature: Warm Mode Turns On.
Set Temperature ≤ Ambient Temperature: Warm Mode Stops.
Ambient
Temperature
23°C
Set
Temperature
25°C
Note :
Please use Remote Control to set temperature; the body of the product does not support this operation.