German pool EFB-326H, Руководство пользователя

Страница: 7 / 15

P.13 P.12
Operating Instructions Cleaning & Maintenance
Warm Mode Instructions
1. Press the “Warm Mode” Button and the display shows the ambient temperature.
2. Press the “+ /
-” on the right side to set the Temperature, and the digital display will be flashing,
which can be set to 1-30°C.
3. 10 seconds after the desired temperature is set, the flashing will stop.
4. The temperature being set should be higher than the ambient temperature, so that the heating
function will be turned on.
5. When the ambient temperature reaches the set temperature, the heating function will stop and
turn into a cool breeze.
6. When ambient temperature dropped to be lower than the set temperature, the heating function
will automatically be activated.
Note: The default temperature of the setting is 20 °C.
In the Warm Mode, when the ambient temperature is below 0°C, the display only shows 01, does not
display negative temperature value.
The Warm Mode run over 9 hours, the machine will automatically stop running. Restart by pressing the
host Power Button in the Body or by using the Remote Control.
Set Temperature > Ambient Temperature: Warm Mode Turns On.
Set Temperature ≤ Ambient Temperature: Warm Mode Stops.
Ambient
Temperature
18°C
Set
Temperature
20°C
Surface Cleaning
• Please do not put the product into water or splash it, which may cause the
machine to be damaged.
• Do not use banana oil, benzine, alcohol, bleach or metal objects to wipe the
surface of the fan, which may scratch the surface or cause discoloration.
• Wipe the surface with a soft, dry cloth. If it is very dirty, use water with a mild
detergent and wipe with a soft cloth.Then wipe with a dry soft cloth.
Air Inlet/Outlet
• Use a soft brush or a vacuum cleaner to clean the dust at the Air Inlet and
Outlet. Please clean it regularly to avoid the buildup of dust. Too much dust is
not healthy and will reduce efficiency of the product.
Remote Control
• Gently wipe the surface of the Remote Control with a soft, dry cloth. If you
don’t use the product for a long time, please remove the batteries inside the
Remote Control to avoid battery consumption.
Storage
• If the product is not used for a long time, place it in a plastic bag after
cleaning. Please avoid storing in a place with vibration (car trunk) or a place
heated or cooled by another appliance. Please avoid placing it in direct
sunlight, or a place with high temperature and/or high humidity. Please keep
it out of reach of young children.
Caution:
Caution: Unplug the power supply before performing maintenance.
Please use Remote Control to set temperature; the Body of the product does not support this
operation.
Watch the video clip