
P.
簡易操作指南
QUICK OPERATING GUIDE
(有關本產品詳細操作說明,請翻閱本說明書P.8。
Please refer to P.8 for detailed operating instructions.
)
向後按壺蓋開關,
打開壺蓋。
Pull back Lid Latch to
open lid.
注入清水於儲水水箱內。
Pour water into Reservoir.
注意:水位不可高於
壺內棒狀物頂部的藍
色“MAX”標誌。
Note: Keep water level
below the blue “MAX”
marking on the rod
inside kettle.
合上壺蓋,必須將它
壓下以確保壺蓋開關
已鎖上。
Close lid with a
downward pressure to
make sure Lid Latch
engages fully.
將熱水壺放在電源底
座上,接上電源。
Place kettle on its
Power Base and plug in
Power Cord.
向下按熱水壺頂部的
藍色水量調節掣,並
同時循箭嘴順時針方
向扭緊直至鎖上。
Lock Valve Button by
rotating it in the direction
of the arrow while
pressing it down.
4
注意:
水位必
須達水壺前方
之最低水位要求
“min
fill”標記的位置,但切
勿超越水
位上限
“max
boil”標記。
Note: Water level must
reach the “min fill” mark
(on the front side of kettle),
and do not fill above the
“max boil” mark.
min fill
max boil
向下按電源開關鍵,
熱水壺便開始煲水,
顯示燈亮起。
Press down Power On/Off
Switch to switch on kettle.
Indicator Light turns on.
6
向下按熱水壺頂部的藍
色水量調節掣,直至水
壺前方(加熱水箱)的水位
上升至所需要的份量。
Press the blue Valve
Button on top of kettle
until water rises to desired
amount, as shown on the
front side of kettle (Boiling
Chamber).
B) 全煲模式
(煮沸整壺水)
Full Tank Mode
(Boil full tank of water)
調校需要煮沸份量
Adjust the amount for boiling
(水位上限)
(最低水位
要求)
5A
A) 省電模式
(只煮沸所需份量)
Eco Mode
(Boil only the amount of
water you need)
5B