German pool BLG-310, Руководство пользователя

Страница: 10 / 24

Care And Maintenance
P.8
Wipe the lid and the appliance with a dry and soft cloth.
1
）
Discoloration with milky or dark deposits, and white
floating particles are generated from water ingredients
(minerals), not from the product itself. Although these
minerals or particles are not harmful to your health,
regular maintenance is highly recommended.
2 ） The following suggestions is just one of the ways
to remove the discoloration, you can also use vinegar
instead.
-
Cut a few lemons into pieces, and squeeze the juice
into the container
- Fill the water up to the “MAX” mark.
- Boil the water and then retain the heat for one hour.
- Discard the water after the water temperature has
completely cooled off. Then use a soft sponge to
clean the container.
- To remove the smell of the lemon, boil water
again and discard the water.
1) Do not immerse the appliance and any electric
component in water.
2) Do not splash water onto the control panel as this
may short circuit or damage the product.
1. Before cleaning, always disconnect the plug from wall outlet.
2. Pour out any remaining water after the water temperature has completely
cooled off.
3. If too much mineral particles are deposited in the container, you may hear loud
noises during boiling, and may have a difficulty in dispensing hot water. Regular
cleaning is highly recommended.
4. Empty the container few times per week to prevent rusting, unpleasant odor, and
mineral deposit.
Discoloration of the container and white particles floating in the water.